shop home view cart checkout euronav search
 
  LEISURE  
  seaPro lite
  seaPro standard
  seaPro sailing
  seaPro plus
  COMMERCIAL
  seaPro fishing
  seaPro pro
  seaPro patrol
  seaPro pilot
  PI3000 passenger info
  UPGRADES
  software & hardware
  Charts & Data
  Admiralty Digital Products
  Livecharts (vector)
  ARCS (raster)
  S57 (ENC vector)
  Navionics (vector)
  Tidal data
  HARDWARE
  AIS Receivers
  AIS Transponders
  Pilot equipment
  USB GPS
  USB to serial converter
  Navtex 2 Receiver
  NMEA-2-WIFI Network
   
  Site - terms and conditions

sunseekerBackMastercardVISA cardJCB cardMaestro card

Order status View Order Status Checkout Checkout Email Email store

Product ID NMEA_2_Wired_Network
NMEA to Wired network converter

Takes the NMEA 0183 serial data from a single device such as a GPS, AIS or instruments on to a local area network (LAN) for use with seaPro or PI 3000.

The input can be RS232 or RS4222 (NMEA 0183). The  RS422 input is easily connected using the terminal block so saving  the wiring of a 9 Pin D type.

The serial port has some lighting protection but doe snot have the NMEA 01822  opto-isolator. This can be added if required using the  NMEAOpto-isolator

 

Price: £100.00 (£120.00 Inc. VAT)

Product ID NMEA-2-WIFI
NMEA-2-Wifi

The new NMEA-2-WIFI unit provides a low cost method of setting up a wireless network. Use it with seaPro to wirelessly transmit your electronic data including position, AIS data, depth, wind, compass etc on board.

  • Dual NMEA 0183 Input
  • Standard WiFi output to you computer or smart phone
  • 12/24 Volt DC power
  • External Antenna
  • Simple Set up

Simple to set up, the NMEA-2-WIFI unit has 2 NMEA inputs which are multiplexed to a single high speed data output which transmits NMEA 0183 data over WIFI for viewing on a smart phone or tablet using suitable Apps* or a PC Navigation program such as seaPro, and provides 2 way communication between the WIFI device and any suitable NMEA devices. With 2 inputs, it can accept NMEA 0183 data at 4800 from any GPS, Chart plotter or Instruments, plus a 38400 baud input from any AIS receiver or transponder, so you only need one unit to collect and transmit all the navigation data to your portable device over WIFI.

For a vessel with a chart plotter at the nav station, using the Comar NMEA-2-WIFI, the helmsman can view all the navigation data* on deck via a a smartphone such as an android or iPhone or tablet.

For boats with a chart plotter at the helm you can check all the critical navigation data down below, making your boats data truly portable.

*Additional software required for your portable device (not supplied)

Price: £195.00 (£234.00 Inc. VAT)
Shopping cart
Shopping cart  Shopping cart
0 Product(s) in cart
Total £0.00
» Checkout

News
 
Copyright Euronav 1991-2019